Jaksta

MFC is switching from flash to webrtc  when running jaksta media recorder it dont detect the webrtc stream at all

Do I need to switch a setting or is it something that will be fixed in future?

Cheers!

I see DASH streams still which is the protocol they have been using for a while.

Could you provide debug logs if you see video and audio streams over webrtc.  We support the webrtc implementations used by several sites,  but each needs to be implemented differently.

They have beta WEBRTC the models can choose to use, most still using the old flash currently 

https://wiki.myfreecams.com/wiki/WebRTC

I dunno if giving model names will help because they probz wont be online when you look 

If you enable flash then keep clickin next model after a few you will come on a model using WEBRTC, you will know becaus as cam loads instead of just "loading webcam.." it will say loading webcam with a green arrow and then a spinning green disc, that means they using WEBRTC which jaksta dont' detect at all as a stream

I've attached what it looks like

Cheers for the help! 

 Hello there, here are examples of models which use it but as stated above its now 99% of them so pretty much any model you click on. 

https://www.myfreecams.com/#Eve___
https://www.myfreecams.com/#AsianLuv_4U
https://www.myfreecams.com/#KimKidmon
https://www.myfreecams.com/#MsLily
https://www.myfreecams.com/#VivianisHere
https://www.myfreecams.com/#Agostinha_Red
https://www.myfreecams.com/#AllisonDesire
https://www.myfreecams.com/#Ana_xo
https://www.myfreecams.com/#EmilyEvansX
https://www.myfreecams.com/#GoGoDream
https://www.myfreecams.com/#Grace
https://www.myfreecams.com/#Jenny_Dove
https://www.myfreecams.com/#JulyaWild
https://www.myfreecams.com/#Kate_Mistress

Apart from above i tried to get you guys some logs. Unsure if there will be anything useful for you but here you are... I will just state this was working for me 100% since i bought this software so i am not doing anything new here.

What i did after enabling debug mode on startup and re-starting jaksta:

1. enabled "automatic detect and download video"
2. open MFC main page
3. open some MFC model on same tab in chrome browser
4. waited 10 seconds
5. repeated above 2 steps few times
6. (just as experiment if it will produce any useful logs tried also following ) paste address "https://www.myfreecams.com/#VivianisHere" into URL field which was currently streaming into and hit "digital video record" 
7. waited 10-20 seconds in which recording failed
8. went to support tab and generated log

@masterpow you have to enable flash

It aint 99% its more like 1 out of 25 or maybe 1 in 50

Top models more likely because you need desent internet

@gary garyson I did enable flash prior to doing all above. (forgot to mention it so thanks)

Hey! i dunno what I'm looking at with the logs, but I searched webrtc

ExtractionEngineDownloader: Not supported: video844.myfreecams.com/webrtc-session.json

Told ya it was webrtc not dash 

Again though I do thank you for the help lol

So did the debug log help? is this something you could upgrade jaksta to do? thanks! appreciate ya 

Cheers @CRS ! that would be mega 

Hey! saw there was an update to Jaksta and was hoping I could now downloads the webrtc mfc streams but still no luck! was this something you didn't include this time? :( cheers pal!